Products

ALL LUCAS PRODUCTS ARE ENTIRELY MADE IN THE USA

Manufacturer of the LUCAS Series of #9 LowBoy Variable Speed Control Foot Pedals and this is our #9-3 which is designed specifcally for Rod Builders Worldwide.


 

LUCAS #9-3 LowBoy Variable Speed Foot Control Pedal

Lucas #9-3 LowBoy Foot Pedal


Specifications:


6 amp rating

120 Volts AC

for Universal Motors Only and comes with two grounded electrical cords, Male 8' long, Female 6' long


Dimensions:

2-1/2" wide x 5-3/4" long x 2-1/2" high

Pedal Height 1-1/4"


Construction: made from Solid Cast Aluminum (Not Plastic) with a very durable Silver Vein powder coat finish


$69.00 plus shipping


For more info, Contact Richard Lucas at Lucadent@verizon.net

The LUCAS Lowboy Variable Speed Rheostat is the #1 Speed Control recommended by Jewelry Designers /Manufacturing Wood Carving Craftsman and is also the #1 Speed Control recommended by people in the Fishing Industry when adding fishing line to fishing reels. Its ergonomics allows for precise and reliable speed foot control. It is truly a jewelers choice when it comes to selecting quality, reliability and precision.


TESTIMONIAL: From a recent buyer: "I have been using a Lucas #9 Lowboy on my Levin lathe for some time now and find it is more comfortable to use while standing than other brands of foot operated speed controls that I have previously used and because of this, the LUCAS #9 LOWBOY is my number one choice in speed controls which I have recommended to friends of mine in the Industry".  


IMPORTANT NOTICE: The LUCAS #9 LowBoy Rheostat should not be used on any type of motor that already has a Variable Speed Control built into the motor...REASON: You cannot use (2) electronic variable speed controllers against each other...the results will eventually burn out the LUCAS #9 and/or the motor you are using, making your tools inoperable and out of warranty.  (there are ways around this issue)


#############################################################################################################################

#8500 Accessories Package

LUCAS #8500 "Jewel" Long Arm (Jewelers) Centrifugal Casting Machine with the "NEW"  Designed Round Casting Well is now available


Accessories:

(2) Hooded 9 oz. Clay Crucibles

(4) SS Flasks  3-1/2" x 5".... 3-1/2" x 2-1/2"

      2-1/2" x 5".... 2-1/2" x 2-1/2"

(2) Cradles for 2-1/2" diameter flasks

     requires 2 to support the 2-1/2" x 5" flask

(2) Universal sprue bases for 3-1/2" & 2-1/2" flasks

(1) Tong 12"

(1) Hi-Heat Casting Gloves 14"

Accessories as seen in photo's below


Overall Dimensions:

Casting well: 25" dia. x 12" high. Comes fully assembled.

Length of arm 23"

Height to top of winding ball /handle 10"


$559.00 with Accessories Package, plus shipping


for more info, Contact Richard Lucas at Lucadent@verizon.net


Close up of releasing trigger

Close up of releasing trigger

The LUCAS #8500 "Jewel" Long Arm (Jewelers) Centrifugal Casting Machine is the latest in the line of Casting Machines from LUCAS.  It was designed for the Manufacturing Jeweler.  We have been asked what's so Special--Unique about the #8500 "Jewel" and the Answer is: Everything including the Arm Releasing Handle located on the outside of the Casting Well.  Think about this for a moment...

(A) no need to reach into the Casting Well to raise a pin to hold the arm after you wind up, it comes with a Built-In Releasing Trigger     (see close up photo's above)

(B) You don't have to reach into the Casting Well to release the Arm, that's what the Arm Releasing Handle does, that Red tip sticking out the side of the tub, Pretty Neat & Very Safe.


###########################################################################################################################

The LUCAS #8500 "Jewel" is also available if you wish, without the protective surround tub to possibly fit into your existing protective tub, but you will still get the accessories package.... and this would cost $425.00 plus shipping.

#####################################################################################################################

LUCAS #750 "Giant" Long Arm (Jewelers) Centrifugal Casting Machine   

How often do you see Made in the U.S.A.

"LUCAS" Dental Co. made in USA since 1930


########################################################################################################################

Lucas #750  "Giant" Long Arm Centrifugal Casting Machine


Accessories:

3-1/2" x 5" SS Flask

3-1/2" x 2-1/2" SS Flask

2-1/2" x 2-1/2" SS Flask

2-1/2" "Acue" Cradle

Universal Rubber Sprue Base for 3-1/2" & 2-1/2" flasks

9oz Clay Crucible

Tongs 12"

Pair of Hi-Heat Casting Gloves

Accessories as seen in photo


Overall Dimensions:

Length of arm 23"

Height to top of winding ball /handle 10"


$339.00 plus shipping


for more info, Contact Richard Lucas at Lucadent@verizon.net

The #75SS "Senior" short arm Dental casting machine comes Standard with (1) each of the following accessories... as seen in photo.


Overall Dimensions: Arm Length: 17"   Height: 10"

 

#75SS-1 Crucible, Quartz Hooded  (2) of these

#75SS-2 Flask, 3-1/2" dia. x 2-1/2" long

#75SS-3 Flask, 2-1/2" dia. x 2-1/2" long

#75SS-4 Flask, 1-3/4" dia. x 1-1/2" long

#75SS-5 Flask, 1-3/8" dia. x 1-1/2" long

#75SS-6 "Acue" Cradle for 2-1/2" dia. flask

#75SS-7 "Acue" Cradle for 1-3/4" dia. flask

#75SS-8 "Acue" Cradle for 1-3/8" dia. flask

#75SS-9 Universal sprue base, rubber,  for 3-1/2",   2-1/2"

#75SS-10 Sprue base rubber for 1-3/4" flask

#75SS-11 Sprue base rubber for 1-3/8" flask

#75SS-12 Tongs, 12"

#75SS-13  14" High Heat Casting Gloves


$339.00 plus shipping


for more info, Contact Richard Lucas at Lucadent@verizon.net


#########################################################################################################################

Lucas #9 LowBoy Foot Pedal


Specifications:


6 amp rating

120 Volts AC

for Universal Motors Only and comes with two grounded electrical cords, Male 8' long, Female 6' long


Dimensions:

2-1/2" wide x 5-3/4" long x 2-1/2" high

Pedal Height 1-1/4"


Construction: made from Solid Cast Aluminum (Not Plastic) with a very durable Silver Vein powder coat finish


$69.00 plus shipping


for more info, Contact Richard Lucas at Lucadent@verizon.net

LUCAS #9 Lowboy Rheostat is the #1 Speed Control recommended by Jewelry Designers /Manufacturing Wood Carving Craftsman and Acrylic Nail Technicians. It is truly a jewelers choice when it comes to selecting quality, reliability and precision.


TESTIMONIAL: from a recent buyer.. "I have been using a Lucas #9 Lowboy on my Levin lathe for some time now and find it is more comfortable to use while standing than other brands of foot operated speed controls that I have previously used and because of this, the LUCAS #9 LOWBOY is my number one choice in speed controls which I have recommended to friends of mine in the Industry.  Bottom line, the Ergonomics of the LUCAS #9 Lowboy allows for precise and reliable speed control with your foot and made out of Cast Aluminum as opposed to plastic as in other brands.


It has been brought to our attention that the #9 LowBoy Rheostat can also be used with the Knew Concepts Power Saw.  You may want to add the LUCAS A-Just-O Shield to your Knew Concepts Power Saw..see photo and contact LUCAS for details


IMPORTANT NOTICE: The LUCAS #9 LowBoy Rheostat should not be used on any type of motor that already has a Variable Speed Control built into the motor...REASON: You cannot use (2) electronic variable speed controllers against each other...the results will eventually burn out the LUCAS #9 and/or the motor you are using, making your tools inoperable and out of warranty.


#############################################################################################################################

LUCAS #9XR  Lowboy Speed Control (foot pedal)

 

Specifications:


6 amp rating

120 Volts AC

which was designed with Special Electronics to be used on the FOREDOM TX Series DC current Motors and comes complete with two grounded electrical cords, Male 8' long, Female 6' long

 

Construction: made from Solid Cast Aluminum (Not Plastic) with a very durable Silver Vein powder coat finish.

 

Dimensions:


2-1/2" wide x 5-3/4" long x 2-1/2" high

Pedal Height 1-1/4"

 

$79.00 plus shipping


for more info, Contact Richard Lucas at Lucadent@verizon.net

 


This LUCAS #9XR speed control with Special Electronics with a proprietary design, was designed for the purpose of operating the 115 volt Foredom Heavy-Duty 1/3 hp DC current motors such as the Foredom TX series & similar permanent magnet DC motors from Foredom.

 

It also has a special female plug (also known as a computer plug) see photo that fits the Foredom TX Series DC motor's shielded male plug.

 

TESTIMONIALS: from a few of the many recent buyers...

The pedal is sooooo awesomely smooth and easy to regulate. Thank you!!!

Awesome product, Fast shipping thank you!     

Excellent foot pedal. It's a joy to use! Speedy delivery. Thank you!     

Great foot controller! Much better than my Foredom!

I use it with my Foredom Flex Shaft. So happy I found this!!!!! 

I have two of these and they are simply the best! with super fast shipping

 

IMPORTANT NOTICE:The LUCAS #9XR LowBoy Rheostat should not be used on any type of motor that already has a Variable Speed Control built into the motor...REASON: You cannot use (2) electronic variable speed controllers against each other...the results will eventually burn out the LUCAS #9XR and/or the motor you are using, making your tools inoperable and out of warranty.

#####################################################################################################################

Ajusto Shield


The Flexible Arm: 13" x 1" diameter (standard) is assembled with (14) segments which can be shortened and lengthened in 7/8" increments by adding or subtracting segments if desired.


Specifications:


Plexiglass shield by Dupont 8" x 6" x 1/8" thick

Magnetic base measures 2-5/8" dia. with a rating of 82 lbs.

Pull and the Spring Clamp is spring loaded with Vinyl Tips that can be attached to a surface up to 1-3/4" in thickness.



$49.00 plus shipping


for more info, Contact Richard Lucas at Lucadent@verizon.net