Products

Lucas Dental Company

manufacturer of centrifugal casting machines

 

Just a Friendly Family Owned Company Since 1930

LUCAS #8500 "Jewel" Long Arm (Jewelers) Centrifugal Casting Machine with the "NEW" Designed Round Casting Well is now available

 

Accessories:

(2) Hooded 9 oz. Clay Crucibles

(4) SS Flasks (3 1/2" x 5, 3 1/2" x 2 1/2", 2 1/2" x 5", 2 1/2" x 2")

(2) Cradles for 2 1/2" dia. flasks

(requires 2 to support the 2 1/2" x 5" flask)

(2) Universal sprue bases

(1) Tong 12"

(1) Hi-Heat Casting Gloves 14"

Accessories as seen in photo

 

Overall Dimensions:

Casting well: 25" dia. x 12" high. Comes fully assembled.

Length of arm 23"

Height to top of winding ball /handle 10"

 

$495.00 plus shipping

 

for more info, Contact Richard Lucas at Lucadent@verizon.net

 

The LUCAS #8500 "Jewel" Long Arm (Jewelers) Centrifugal Casting Machine is the latest in the line of Casting Machines from LUCAS. It was designed for the Manufacturing Jeweler. We have been asked what's so Special--Unique about the #8500 "Jewel" and the Answer is: Everything including the Arm Releasing Handle located on the outside of the Casting Well. Think about this:

(A) no need to reach into the Casting Well to raise a pin to hold the arm after you wind up, it comes with a Built-In Trigger

(B) You don't have to reach into the Casting Well to release the Arm, that's what the Arm Releasing Handle does.

Pretty Neat & Very Safe.

______________________________________________________________________________________________________

Accessories to #8500 Jewel and close up pictures

Close up of 8500 Jewel

Lucas #750 "Giant" Long Arm Centrifugal Casting Machine

 

Accessories:

3 1/2" x 5" SS Flask

3 1/2" x 2 1/2" SS Flask

2 1/2" x 2" SS Flask

2 1/2" "Acue" Cradle

Universal Rubber Sprue Base

9oz Clay Crucible

Tongs 12"

Pair of Hi-Heat Casting Gloves

Accessories as seen in photo

 

Overall Dimensions:

Length of arm 23"

Height to top of winding ball /handle 10"

 

$299.00 plus shipping

 

for more info, Contact Richard Lucas at Lucadent@verizon.net

______________________________________________________________________________________________________________________

Lucas #9 LowBoy Foot Pedal

 

Specifications:

 

6 amp rating

120 Volts AC

for Universal Motors Only and comes with two grounded electrical cords, Male 8' long, Female 6' long

 

Dimensions:

2 1/2" wide x 5 3/4" long x 2 1/2" high

Pedal Height 1 1/4"

 

Construction: made from Solid Cast Aluminum (Not Plastic) with a very durable Silver Vein powder coat finish

 

$49.00 plus shipping

 

for more info, Contact Richard Lucas at Lucadent@verizon.net

LUCAS #750 "Giant" Long Arm (Jewelers) Centrifugal Casting Machine

How often do you see Made in the U.S.A.

"LUCAS" Dental Co. made in USA since 1930

______________________________________________________________________________________________________________________

The #75SS "Senior" short arm Dental casting machine comes Standard with (1) each of the following accessories... as seen in photo.

 

Overall Dimensions: Arm Length: 17" Height: 10"

#75SS-1 Crucible, Quartz Hooded (2) of these

#75SS-2 Flask, 3-1/2" dia. x 2-1/2" long

#75SS-3 Flask, 2-1/2" dia. x 2" long

#75SS-4 Flask, 1-3/4" dia. x 1-1/2" long

#75SS-5 Flask, 1-3/8" dia. x 1-1/2" long

#75SS-6 "Acue" Cradle for 2-1/2" dia. flask

#75SS-7 "Acue" Cradle for 1-3/4" dia. flask

#75SS-8 "Acue" Cradle for 1-3/8" dia. flask

#75SS-9 Universal sprue base, rubber,

for 3-1/2", 2-1/2" & 1-3/4" flasks

#75SS-10 Sprue base rubber for 1-3/4" flask

#75SS-11 Sprue base rubber for 1-3/8" flask

#75SS-12 Tongs, 12"

#75SS-13 14" High Heat Casting Gloves

 

$299.00 plus shipping

 

for more info, Contact Richard Lucas at Lucadent@verizon.net

 

______________________________________________________________________________________________________________________

LUCAS #9XR Lowboy Speed Control (foot pedal)

Specifications:

 

6 amp rating

120 Volts AC

which was designed with Special Electronics to be used on the FOREDOM TX Series DC current Motors and comes complete with two grounded electrical cords, Male 8' long, Female 6' long

Construction: made from Solid Cast Aluminum (Not Plastic) with a very durable Silver Vein powder coat finish.

Dimensions:

 

2 1/2" wide x 5 3/4" long x 2 1/2" high

Pedal Height 1 1/4"

$59.00 plus shipping

 

for more info, Contact Richard Lucas at Lucadent@verizon.net

 

LUCAS #9 Lowboy Rheostat is the #1 Speed Control recommended by Jewelry Designers /Manufacturing Wood Carving Craftsman and Acrylic Nail Technicians. It is truly a jewelers choice when it comes to selecting quality, reliability and precision.

 

TESTIMONIAL: from a recent buyer.. "I have been using a Lucas #9 Lowboy on my Levin lathe for some time now and find it is more comfortable to use while standing than the Linemaster Clipper SCR I previously used." and because of this, LUCAS DENTAL gets many orders from people who have a FOREDOM, PEPE, LINEMASTER or BUFFALO foot control and switch over to the LUCAS #9 LowBoy for better & precise speed delivery.

 

It has been brought to our attention that the #9 LowBoy Rheostat can also be used with the Knew Concepts Power Saw You may want to add the LUCAS A-Just-O Shield to your Knew Concepts Power Saw..see photo and contact LUCAS for details

 

IMPORTANT NOTICE: The LUCAS #9 LowBoy Rheostat should not be used on any type of motor that already has a Variable Speed Control built into the motor...REASON: You cannot use (2) electronic variable speed controllers against each other...the results will eventually burn out the LUCAS #9 and/or the motor you are using, making your tools inoperable and out of warranty.

 

______________________________________________________________________________________________________________________

This LUCAS #9XR speed control with Special Electronics with a proprietary design, was designed for the purpose of operating the 115 volt Foredom Heavy-Duty 1/3 hp DC current motors such as the Foredom TX series & similar permanent magnet DC motors from Foredom.

It also has a special female plug (also known as a computer plug) see photo that fits the Foredom TX Series DC motor's shielded male plug.

TESTIMONIALS: from a few of the many recent buyers...

The pedal is sooooo awesomely smooth and easy to regulate. Thank you!!!

Awesome product, Fast shipping thank you!

Excellent foot pedal. It's a joy to use! Speedy delivery. Thank you!

Great foot controller! Much better than my Foredom!

I use it with my Foredom Flex Shaft. So happy I found this!!!!! I

I have two of these and they are simply the best! with super fast shipping

IMPORTANT NOTICE:The LUCAS #9XR LowBoy Rheostat should not be used on any type of motor that already has a Variable Speed Control built into the motor...REASON: You cannot use (2) electronic variable speed controllers against each other...the results will eventually burn out the LUCAS #9XR and/or the motor you are using, making your tools inoperable and out of warranty.

 

 

______________________________________________________________________________________________________________________

Ajusto Shield

 

The Flexible Arm: 13" x 1" diameter (standard) is assembled with (14) segments which can be shortened and lengthened in 7/8" increments by adding or subtracting segments if desired.

 

Specifications:

 

Plexiglass shield by Dupont 8" x 6" x 1/8" thick

Magnetic base measures 2 5/8" dia. with a rating of 82 lbs.

Pull and the Spring Clamp is spring loaded with Vinyl Tips that can be attached to a surface up to 1 3/4" in thickness.

 

 

$35.00 plus shipping

 

for more info, Contact Richard Lucas at Lucadent@verizon.net

 

Lucas Dental Company

360 Knickerbocker Avenue, Unit #4

Bohemia, New York 11716-3124

 

Tel: +1 (631) 244-2807

Fax: +1 (631) 244-2720

lucadent@verizon.net

Copyright © All Rights Reserved